Advanced Vehicles and Vehicle Control Knowledge Center (AAVC)
Budapest University of Technology and Economics
Dr. Zsolt Stukovszky, director
H-1111 Budapest, Hungary
Stoczek utca 6., J building 516.
Tel: +36 1 463 1753
Fax: +36 1 463 3255
E-mail: info@ejjt.bme.hu
www.ejjt.bme.hu
The AVVC was established in 2005 with the intention of or¬ganizing, documenting and developing the knowledge that is available at the consortium partners in the fields of vehicle electronics and mechatronics. The result of this consolidation procedure is a marketable product of “knowledge-type” that will be promoted through the Knowledge Center owned by the Budapest University of Technology and Economics (BME). Since the future prosperity of the Knowledge Centre builds on the satisfaction of customers purchasing our "know-how", our networking efforts received special attention. We have formed strategic alliances with professional organizations of our potential clients (Association of the Hungarian Automotive Industry, Hungarian Logistics Association).
Applus IDIADA Group
Headquarters and Technical Centre
L'Albornar PO Box 20
E-43710 Santa Oliva, Spain
Tel: +34 977 166 042
Fax: +34 977 166 013
E-mail: idiada@idiada.com
www.idiada.com
Applus IDIADA, global partner to the automotive industry worldwide, supports its clients in their product development activities by providing design, engineering, testing and homologation services. Applus IDIADA's expertise in both physical and virtual testing results in maximum efficiency in cost and time. A large team of 900 engineers drawn from over 25 countries, as well as an international network of subsidiaries and branch offices in 17 countries ensure clients will be given fast and customized services.
ATZ – Springer Fachmedien
Abraham-Lincoln-Str. 46
D – 65189 Wiesbaden
Tel. +49 611 7878 0
Fax. +49 611 7878 407
E-mail: sabrina.brokopp@springer.com
www.ATZonline.com
Since 1898 ATZ is a publication for technically oriented management within the automotive industry – and therefore the eldest automotive publication of the world. An essential source of information for all engineers of automotive construction, worldwide. We have kept this tradition successfully until today. Along the printed publications we launched ATZonline and ATZlive, two additional stands in the foundation of news coverage and in the exchange of experiences. You will find all information at www.ATZonline.com.
AUDI HUNGARIA MOTOR Kft.
Headquarters:
Kardán u. 1.
H-9027 Győr, Hungary
Tel: +36 96 661000
Fax: +36 96 661200
E-mail: pr@audi.hu
www.audi.hu
Audi Hungaria Motor Kft. in Győr manufactures engines for the different brands of the Volkswagen Group. It builds the Coupé and Roadster versions of the Audi TT and the Audi A3 Cabriolet in conjunction with the Ingolstadt plant. Since 2001 the engine development center supports the serial production and since 2005 there is a tool factory. Since it was established in 1993, the company has developed into one of Hungary’s largest exporters and highest-revenue companies.
BETA CAE Systems S.A.
Dr.Eng. Samouil Saltiel
Kato Scholari, Thessaloniki
GR-57500 Epanomi, Greece
Tel:+30 2392 021420
Fax:+30 2392 021828
E-mail: ansa@beta-cae.gr
www.beta-cae.gr
BETA CAE Systems S.A. is an engineering software company committed to the development of best-in-class pre- and post-processing solutions for multidisciplinary CAE applications. The BETA CAE Systems flagship product suite comprised of ANSA pre-processor and μETA post-processor, holds a worldwide leading position in the CAE software in many sectors, including automotive and motor sports.
BMW Group
Bayrische Motoren Werke
Petuelring 130
80809 München, Germany
Tel: +49 89 382 44300
Fax: +49 89 382 43139
E-mail: Christoph.Huss@bmw.de
www.bmw.com
With the three brands, BMW, MINI and Rolls-Royce Motor Cars, the BMW Group has its sights set firmly on the premium sector of the international automobile market. To achieve its aims, the company knows how to deploy its strengths with an efficiency that is unmatched in the automotive industry. The strategic objective is clearly defined: The BMW Group is the leading provider of premium products and premium services for individual mobility. Along with its automotive concerns, the BMW Group's activities comprise the development, production and marketing of motorcycles, as well as comprehensive financial services for private and business customers.
Cambustion
Mark Peckham
J6 The Paddocks
347 Cherry Hinton Road
Cambridge CB1 8DH, United Kingdom
Tel: +44 1223 210250
Fax: +44 1223 210190
E-mail: info@cambustion.com
www.cambustion.com
Since 1987 engineers have used Cambustion analyzers for HC, NOx, CO/CO2 and particulates to meet emissions targets in a time and cost effective manner. As emissions limits reduce, Cambustion products provide key tools to achieve lower drivecycle emissions during transient operation, and investigate variability during steady state operation. Embraced globally by DPF and vehicle manufacturers, in Europe, Japan and USA, Cambustion’s DPG offers a cost effective and technically superior solution for DPF testing and development.
Co-operation Research Centre for Vehicle Industry, Electronics and Logistics (CRC for VIEL)
Contact person: Dr. Imre Czinege
Egyetem Square 1.
H-9026 Győr, Hungary
Tel: +36 96 503 400, +36 96 503 457
Fax: + 36 96 613 681
E-mail: czinege@sze.hu, tothe@sze.hu
jelkkk.sze.hu
The CRC for VIEL managed by Universitas-Győr Nonprofit Ltd. started its activity as the result of a successful Economic Development Operative Program application at the 1st of June 2008. The project will run until May 2011. It received 400 mFt support, which is supplemented with 400 mFt project expenses financed by companies. Universitas-Győr Nonprofit Ltd. – being in the partial property of Széchenyi István University – has formed a consortium consisting of 25 companies. The research activity is organized around four main topics, all of them are divided to more subprojects:
- Vehicle industry
- Electronics and informatics
- Logistic processes and packaging
- Traffic infrastructure
European Powdered Metallurgy Association
Jonathan Wroe
Executive Director
2nd Floor, Talbot House, Market Street
Shrewsbury, Shropshire, SY1 1LG
United Kingdom
Tel: +44 1743 248899
Fax: +44 1743 362968
E-mail: info@epma.com
www.epma.com
Powder Metallurgy (PM) is a cost effective, manufacturing method of near net-shaped components that can achieve narrow tolerances and intricate features. PM components can be tailor-made to suit their environment. As a technology PM is well placed to meet the future manufacturing challenges thanks to its flexibility and cost competitiveness. The European Powdered Metallurgy Association (EPMA) is the trade association for the Powder Metallurgy (PM) industry in Europe. For more details on the Powder Metallurgy process please visit the EPMA website, a world leading source of powder metallurgy information, www.epma.com/aboutpm
ESI Group
Elise Lavoue
Parc d'Affaires SILIC
99 rue des Solets, BP 80112
94513 Rungis cedex, France
Tel: +33 1 41 73 58 46
Fax: +33 1 41 73 58 99
E-mail: Elise.Lavoue@esi-group.com
www.esi-group.com
ESI is a pioneer and world-leading provider in virtual prototyping that take into account the physics of materials. ESI has developed an extensive suite of coherent, industry-oriented applications to realistically simulate a product’s behavior during testing, to fine-tune manufacturing processes in accordance with desired product performance, and to evaluate the environment’s impact on performance. ESI’s solutions fit into a single collaborative and open environment for End-to-End Virtual Prototyping, thus eliminating the need for physical prototypes during product development. The company employs over 750 high-level specialists worldwide covering more than 30 countries.
FEV Motorentechnik GmbH
Neuenhofstraße 181
52078 Aachen, Germany
Tel: +49 241 5689-0
Fax: +49 241 5689-119
E-mail: marketing@fev.com
www.fev.com
FEV is an independent and internationally recognized leader in the design and development of powertrain systems. FEV provides internal combustion engine and alternative driveline development together with their vehicle integration. This includes the development and application of hybrid and electric vehicles, transmission systems, E/E components/systems, control hard- and software as well as chassis development. Based on FEV’s own deep experience in the industrial and economic operation of test facilities FEV offers a wide range of test and instrumentation systems and related services covering applications from R&D testing through to end-of-line hot tests.
General Motors Powertrain in Europe
| Powertrain Headquarter Adam Opel GmbH Friedrich Lutzmann Ring B2 65423 Rüsselsheim, Germany Tel: +49 6142 7 67000 www.opel.com |
Diesel Engineering Center GM Powertrain Europe Corso Castelfidardo 36. 10138 Torino, Italy Tel: +39 011 424 8010 |
Part of the Opel/Vauxhall organization, GM Powertrain in Europe has global development responsibility for passenger car diesel engines, small gasoline engines, manual transmissions, diesel hybrid development and diesel controls for GM vehicles worldwide. Within a portfolio of advanced propulsion technologies, Powertrain Engineering in Europe is developing a new generation of engines and transmissions which will reduce vehicle emissions, improve fuel efficiency and offer alternative fuel choices for drivers around the world.
Honda Motor Ltd.
Vikki Hood
Honda Motor Europe Ltd.,
470 London Road, Slough,
Berkshire, SL3 8QY, United Kingdom
Tel: +44 1753 590062
E-mail: vikki.hood@honda-eu.com
www.world.honda.com
Honda is the world's largest motorcycle manufacturer and one of the leading car manufacturers. Honda develops, manufactures and markets a wide variety of products, ranging from small general-purpose engines and scooters to specialty sports cars, to earn the Company an outstanding reputation from customers worldwide. In addition, the Company has conducted its activities with a commitment to protecting the environment and enhancing safety in mobility.
ITDH – Investment and Trade Development Hungary
Contact person: Dóra Dweik
Andrássy út 12.
H-1061 Budapest, Hungary
Tel: +36 1 472 8188
E-mail: investment@itd.hu
www.itdh.com
Daimler, Audi, Suzuki, GM… Auto giants who justify that Hungary is a favourable investment location. The automotive sector is one of Hungary’s core industries, the sector exports 90pc of its production and accounts for 20pc of Hungary's total exports. Not only OEMs but 14 of the top 20 Tier 1 suppliers have set up production facilities. Several companies already operating in Hungary expanded their activities into R&D, such as Audi, GM, Bosch, Schefenacker, ZF or Knorr-Bremse. Outstanding R&D fields are Engine development, Automotive electronics and IT, Renewable fuel solutions and Car body engineering. If you are interested in doing business in Hungary, please contact ITDH.
Professional Engineering Publishing
Catherine Chimes
1 Birdcage Walk
London, SW1H 9JJ, United Kingdom
Tel: +44 20 7304 6904
E-mail: marketing@pepublishing.com
www.pepublishing.com
As publishers to the Institution of Mechanical Engineers, our high-quality titles cover a range of engineering subjects. Of particular interest to FISITA delegates will be our two international journals which focus on automotive research; Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, and the International Journal of Engine Research. We also publish Automotive Engineer magazine, which includes unmissable features and interviews on the latest developments within the industry.
SAMTECH Headquarters
Philippe Pretot, SAMTECH France Director
Patrick Morelle, SAMTECH Deutschland Director
Rue des Chasseurs-Ardennais 8
B-4031 Ličge (Angleur), Belgium
Tel: +32 4 361 69 69
Fax: +32 4 361 69 80
E-mail: marketing@samtech.com
www.samtech.com
SAMTECH provides the Vehicle manufacturers with CAE simulation software to analyse more accurate Vehicle Dynamics, Powertrain and Transmission, Noise and Vibration Hardness models.
Why?
The market is requiring more robust and cost efficient solutions, design cycles and overall time-to-market must become ever shorter. Cutting edge technology such as accurate numerical simulation is an obvious response to these challenges and this is where SAMTECH can help you!
The Scuderi Group, LLC
Lutz Deyerling
European Office
Goethestraße 18
D-60313 Frankfurt, Germany
Tel: +49 69 928 8497-0
E-mail: lutz@scuderigroup.com
www.scuderigroup.com
Scuderi Group is a technology licensing company that has developed the Scuderi Engine which is currently under testing at an independent laboratory. The Scuderi Engine utilizes a new thermodynamic process of Firing After Top Dead Center, which produces Diesel-like torque, very fast flame speeds and up to 80% less emissions than competitive Otto Engines. At the same time the engine can be produced at low costs & in existing supply chains. OEMs implementing the Scuderi Engine will be enabled to increase fuel efficiency of their cars by up to 50%.
STUDENT BAY
dr. Tímea Fülep
BME Faculty of Transportation Engineering
Department of Automobiles
Stoczek u. 6.
H-1111 Budapest, Hungary
Tel: +36 1 463-1615
Fax: +36 1 463-3978
E-mail: fulep.timea@auto.bme.hu
The FISITA 2010 World Automotive Congress is introducing objects developed by Hungarian students to demonstrate the future of automotive technology. Several Hungarian ongoing researches are going to be presented by the Hungarian higher education institutes of automotive engineering supported by the Hungarian government or automotive companies.
On this occasion the attendees and the visitors have the opportunity to get proper information personally from the developers about the following vehicles:Please, do not miss the Baywatch!
- Formula Student racing car
- Hybrid Car
- BOSCH Rexroth Pneumobil
- Shell ECO Marathon cars:
- ICE car
- Solar energy driven car
TATA Motors Ltd.
Mr. Arup S Mukherjee
Assistant General Manager (Corporate Communications)
Mumbai, India
E-mail: am@tatamotors.com
www.tatamotors.com/
Tata Motors is India's largest automobile company, with consolidated revenues of Rs.70,938.85 crores ($ 14 billion) in 2008-09. Through subsidiaries and associate companies, Tata Motors has operations in the UK, South Korea, Thailand and Spain. Among them is Jaguar Land Rover, the business comprising the two iconic British brands. It also has an industrial joint venture with Fiat in India. With over 4 million Tata vehicles plying in India, Tata Motors is the country's market leader in commercial vehicles and among the top three in passenger vehicles. It is also the world's fourth largest truck manufacturer and the second largest bus manufacturer. Tata cars, buses and trucks are being marketed in several countries in Europe, Africa, the Middle East.
Toyota Motor Corporation
Kenji Matsunaga
Assistant Manager
1, Toyota-Cho
Toyota 471-8572, Japan
Tel: +81-565-72-1494
Fax: +81-565-72-1169
E-mail: matunaga@ip.tec.toyota.co.jp
www.toyota.co.jp/en/index.html
Company’s Activities
Since its foundation, Toyota has conducted business activities under the guiding principle of “contributing to the development of a prosperous society through the manufacture of automobiles”.
Aiming to help build a sustainable society in the future, Toyota works in the three areas of research and development, manufacturing and social contribution.
ZF Friedrichshafen AG
Hauptverwaltung und Zentrale Forschung und Entwicklung
D 88038 Friedrichshafen
Tel: +49 7541 77-0
Fax: +49 7541 77-908000
E-mail: postoffice@zf.com
www.zf.com
2009 Facts & Data
Sales Mio € million 9.371
Capital expenditure € million 516
Mitarbeiter/Employees 60.480
ZF is a leading worldwide automotive supplier for Driveline and Chassis Technology. ZF develops and produces products serving the mobility of human beings and goods. Innovations in Driveline and Chassis Technology provide increased driving dynamics, safety, comfort, and economy as well as lower fuel consumption and emissions in the vehicles of the customers: By land, by sea, and in the air.