A1-3
IC Engines, Goals and Development
Tuesday 1 June, 08:00 - 10:30
- Chair:
- Prof. Franz X. MOSER
- Co-chair:
- SZEITL Norbert
- F2010A062
- Heat Transfer Measurements Inside a Gas Fuelled Spark Ignited Engine for Model Validation
- Ir. Joachim Demuynck, Ghent University - UGent, Belgium
- F2010A074
- Influence of Diesel Biofuels on Engine Oils Deterioration - Extended Methods of Engine Oils Assessment
- Dr. Zbigniew Stepien, Oil and Gas Institute, Poland
- F2010A084
- The PCCI Combustion Process for Diesel Engines. A Key Element for Upcoming Euro 6.
- Mr. Anyelo Vanegas, Institute of Combustion Technology- RWTH Aachen, Germany
- F2010A166
- Optimization of the Glow Plug - Spray Interaction for Robust Low-temperature Startability in Low Compression Ratio Diesel Engines by Means of Combined 3D-CFD and Design for Six Sigma
- Giovanni Cipolla, GM Powertrain - Europe, Italy
Posters with Brief Oral Introduction
A selected number of Poster Authors have been offered the opportunity to make a short presentation about the content of their Posters (PBOIs - Posters with Brief Oral Introduction) during a Technical Session which addresses the same topic. PBOI authors will be available to meet with delegates for in-depth discussions about their posters during the refreshment and lunch breaks which follow the Technical Session in which their PBOI is included.
- F2010C081
- Development of Principles and Methods of Estimation of Thermal Condition of Semitransparent Coatings in Complex Heat Exchange Combustion Chambers for Low-Heat-Rejection Diesel Engines
- Prof. Vladimir Merzlikin, Moscow State Technical University MAMI, Russia
- F2010A009
- Enhancement Potential of the Thermal Conversion Efficiency of Ice Cycles by Using of a Real Atkinson Cycle Implementation and (very) High Pressure Turbo Charging
- Prof. Dr. Victor Gheorghiu, University of Applied Sciencies, Germany