A1-6
IC Engines, Goals and Development
Wednesday 2 June, 08:00 - 10:00
- Chair:
- Dr. NÉMETH Huba
- F2010A156
- Development of an Innovative Direct-Injection System for Hydrogen Reciprocating Engines
- Dr. Stefania Zanforlin, Università di Pisa, Italy
- F2010A159
- Hydrogen as a fuel - Lessons learnt
- Dr. Alexander Stubinitzky, Linde AG, Germany
- F2010A162
- Influence of Inlet Pressure, EGR, Combustion Phasing, Speed and Pilot Ratio on High Load Gasoline Partially Premixed Combustion
- Mr. Vittorio Manente, Lund University, Sweden
Posters with Brief Oral Introduction
A selected number of Poster Authors have been offered the opportunity to make a short presentation about the content of their Posters (PBOIs - Posters with Brief Oral Introduction) during a Technical Session which addresses the same topic. PBOI authors will be available to meet with delegates for in-depth discussions about their posters during the refreshment and lunch breaks which follow the Technical Session in which their PBOI is included.
- F2010A151
- An Experimental Study on Heat Transfer Coefficient of All Combustion Chamber Wall Surfaces in a Naturally Aspirated D.I. Diesel Engine
- Prof. Yoshiteru Enomoto, Tokyo City University (former name is Musashi Institute of Technology), Japan
- F2010B080
- Identification of the Phase Changing Process of a Propane-butane Mixture in the Evaporator of a Car Engine Fuel System
- Dr. Zbigniew Kneba, Gdansk University of Technology , Poland
- F2010A110
- Development of a Novel Single-mode, Steady-state Test Cycle for Light-duty Diesel Engines
- Dr. Hoon Kiat Ng, The University of Nottingham (Malaysia Campus), Malaysia
- F2010C198
- Simulation of a Spark Ignition Engine Functioning with Cylinders Deactivation
- Mr. Valerian Croitorescu, University Politehnica of Bucharest, Romania