Vehicle design and development
- F2010B071
- Fuel Spray Parameter Analysis for Different Common-rail Injectors
- Dr. Ireneusz Pielecha, Poznan University of Technology, Poland
- F2010B074
- A Study on the Development of Automotive Front Lower Arm by Using Hybrid Manufacturing Process
- Mr. Sang Woo So, Automotive Parts Innovation Center, Korea
- F2010B086
- The Parametric Study of the Development of Magnesium Seat Frame for Passenger Vehicle by Design of Experiments Method
- Mr. Kiseong Kim, Korea university of technology and education, Korea
- F2010B088
- Vehicular Management System
- Mr. Suk-Hyun Seo, Sungkyunkwan University, Korea
- F2010B090
- An Evaluation of the FlexRay-CAN Gateway-Embedded System in the HEV Test Bench
- Mr. Suk-Hyun Seo, Sungkyunkwan University, Korea
- F2010B093
- Comparison of Two Types of OSEK Network Management
- Mr. Suk-Hyun Seo, SungKyunKwan University , Korea
Posters with Brief Oral Introduction
A selected number of Poster Authors have been offered the opportunity to make a short presentation about the content of their Posters (PBOIs - Posters with Brief Oral Introduction) during a Technical Session which addresses the same topic. PBOI authors will be available to meet with delegates for in-depth discussions about their posters during the refreshment and lunch breaks which follow the Technical Session in which their PBOI is included.
- F2010B007
- The Potential of Parametric Design Methods in Automotive Door Development
- Dr. Mario Hirz, Graz University of Technology, Institute of Automotive Engineering, Austria
- Session: Development of Vehicle Parts and Systems
- F2010B012
- Multibody simulation of curvelinear dynamics while engineering superlong highway multilink trucks
- Dr. Sergei Kharytonchyk, Joint Machine Engineering Institute, Belarus
- Session: Vehicle Performance Tests and Simulations
- F2010B035
- Roller Gearing and Power Transmission Technology for Automotive Applications
- Dr. Pal Bogar, sincroll drive technologies ltd, United Kingdom
- Session: Development of Vehicle Parts and Systems
- F2010B049
- Development of an Integrated Energy Absorber with Tube Expansion Type for Frontal Crash
- Dr. Jiho Lim, POSCO, Korea
- Session: Passive Safety Issues
- F2010B050
- Variable Valve Actuation: Evaluation Performance and Optimization Tools
- Ing. Alessandra Guzzo, University of Calabria, Italy
- Session: IC Engines, Goals and Development
- F2010B056
- The Development of a Down-scaled Over-actuated Vehicle Equipped with Autonomous Corner Module Functionality
- Mr, Johannes Edrén, KTH, Sweden
- Session: Development of Vehicle Parts and Systems
- F2010B058
- CVT Chain Modelling: a Continuous Model vs. a Multibody Approach
- Mr. Leonardo De Novellis, Politecnico di Bari, Italy
- Session: Development of Vehicle Parts and Systems
- F2010B066
- Advances in the Development of Vehicle Refinement Using Virtual Test Rig Applications Based on Real World Test Data
- Mr. Jonathan Webb, IDIADA AT, Spain
- Session: Vehicle Performance Tests and Simulations
- F2010B080
- Identification of the Phase Changing Process of a Propane-butane Mixture in the Evaporator of a Car Engine Fuel System
- Dr. Zbigniew Kneba, Gdansk University of Technology , Poland
- Session: IC Engines, Goals and Development
- F2010B112
- Lightweight Design for Efficient Vehicles
- Miss Jo Elgood, Ricardo UK, United Kingdom
- Session: Development of Vehicle Parts and Systems